As a core piece of equipment in mining operations, the Crawler Rock Drilling Rig must be operated in compliance with the manufacturer's quality management system requirements. Standardized safety protocols can reduce accident rates by over 85%.
Key Safety Control Points:
1. Personnel Qualification & Training:All operators **must be certified and professionally trained** to handle emergency situations effectively.
2. Work Zone Safety & Environmental Controls: Establish a 10-meter safety exclusion zone around the equipment. On slopes, maximum operating angle must not exceed 30 degrees.Strictly prohibit standing under the machine's articulated boom.Demarcate zones with reflective warning tape.
Maintain minimum illumination of 50 lux for night operations.Immediately cease work during thunderstorms.Ensure electrical wiring harnesses are fully sealed against rain.
3. System Pressure Management:
Hydraulic system operating pressure must not exceed 110% of the rated value. Safety valves must be regularly tested and calibrated.
Standard Operating Procedure:
A comprehensive 15-point safety checklist must be completed before starting the Crawler Rock Drilling Rig.
During drilling, 12 key parameters-including oil temperature and system pressure-must be monitored in real time.
Any equipment abnormalities must be documented in writing during shift handover.
Key Regulatory Requirements
1.Protective devices must maintain 100% operational integrity (including safety guards and emergency stop systems).
2.Noise levels must be controlled below 85 dB, with dust concentration maintained under 10 mg/m³.
3.Wire rope discard criteria must strictly comply with GB/T5972 standards.
Professional Maintenance
1.Use genuine factory parts to prevent incompatibility issues and potential damage.
2.Perform all maintenance and repairs using specialized tools to avoid non-standard practices.
3.Conduct comprehensive computer-aided diagnostics for thorough and safe fault identification.
Emergency Management
Fire extinguishers must be strategically installed in appropriate locations on the equipment. Conduct daily functional tests and monthly comprehensive inspections to ensure safe and normal machine operation.
Performance Benefits Equipment overall efficiency can be increased by 40%, with maintenance costs reduced by 35%. We will continue to optimize machine safety protocols. The industry is currently advancing 5G intelligent drilling rig safety standards, with future operations moving toward remote control to achieve intrinsic safety.
