Introduction

1.sizes：4,900x2,000x2,200 and 4,500kg/4,250kg

Application: 1. Engineering field: crawler and drilling rig is used in water conservancy and transportation engineering for grouting holes in hydropower station cofferdams and anti-seepage walls of DAMS. The modular design supports rapid switching of drilling tools, meeting diverse needs such as grouting and exploration. Coordinated operation of hoists: Hillside platform integration 8 - ton hoist, drilling tools and steel liners synchronous hoisting the positioning, 40% surge environment to shorten the auxiliary operation time and rock anchor pile construction: In the cross-sea wharf project of Daishan, Zhejiang Province, the drilling vehicle was equipped with a flexible hydraulic rod stabilizer, which, in combination with the telescopic oulegs, withstood the impact of surging waves and successfully completed the drilling of high-slope anchor piles with a slope of 40:1. The efficiency was increased by 110% compared with the traditional process.

In conclusion, crawler and drilling rig play a significant role in multiple industries due to their wide range of applications and efficient working performance.

Details

Crawler and drilling rig power and walking system of diesel engine, yuchai turbocharged water-cooling engine as the main configuration, 58-128 - kw power, support - 30 ℃ low temperature start. Caterpillar chassis: 320-565 - mm clearance from the ground, gradeability 23-58%, walking speed 0-3.8 km/h, to adapt to the open pit mine air compressor: complex terrain aided system integration screw air compressor (displacement 13 - after 25 m/min), work pressure 1.0 2.4 MPa, provide high pressure air driven shock slag side by side. Dust removal device: hydraulic fan dedusting systems capture rate > 92%, significantly reduce homework dust concentration characteristics: air compressor separation design, support high pressure drilling (> 2.0 MPa), specializes in hard rock stratum 4. Scene: metallurgical mines in 90-178 mm hole blasting, dust capacity up to 20 ° slope control: hydraulic dust concentration in the dust removal system make the areas fell by 85%, conform to the requirements of the green mining.

Specification Parameters

Diesel engine parameters
Drilling rig model	Power	rated power
KZ-416	Yuchai YC4DK80	58kW
KZ-416-1	Yuchai YC4DK80	58kW(Standard dry dust collector)

common parameter
Drill pipe type	φ64x3,000mm
Diameter of drill hole	φ90-127mm
Maximum working torque	1,950N.m
Speed of rotation	0-150rpm
Force of propulsion	15 kN
Force of lift	25 kN
Mode of propulsion	Cylinder chain
Speed of walking	2.5km/h
Hill climbing ability	25º
Total weight	4,500kg/4,250kg
Transport size (LxWxH)	4,900x2,000x2,200

Uses

Crawler and drilling rig can be used in mining, mainly for large-diameter blast hole drilling in open-pit mines. They are suitable for various medium and small-sized mining operations and are key equipment for the early stage of open-pit mining. Engineering blasting is widely used in rock blasting projects, such as rock blasting hole drilling in water conservancy projects, road construction, and national defense construction, and is particularly suitable for slope support construction.

Features

We offer a variety of optional options: the guide rails can be reduced or lengthened, and you can choose either cylinder propulsion or motor propulsion. We provide the machine warranty for 3 months after-sales service, to provide detailed guidance and the use of drilling rig.

Contact

Welcome to purchase drilling machinery manufacturing. All kinds of needs can be customized. Factory direct sales and lifetime maintenance. Welcome your inquiries.

FAQ

Q: What should I do if the impactor of the crawler and drilling rig doesn't work?

A: Troubleshoot steps: (1) check valve plates burst; ② Clear the debris at the tail end of the drill bit or the blocked exhaust port. When there is excessive water accumulation in the hole, lift the impactor to drain water and reduce resistance.

Q: How to prevent drill pipe breakage?

A: Regularly check the pipe wall thickness and wear, avoid excessive wear of the drill pipe; And sure the connection joints, reducing friction of hole wall.

Q: What are the requirements for equipment stability?

A: Rig is apart from the top line of minimum distance: 2.5 m (crawler and drilling rig machine) 512; Put down the drill stand during slope > 15 °, and adopt measures to prevent capsizing.

Hot Tags: crawler and drilling rig, China crawler and drilling rig manufacturers, suppliers, factory, hydraulic rock drill for skid steer, drill bit for rock jewelry, air track rock drill, dth drill rods, drill bit for river rock, digger derrick rock auger