Introduction
1. Size: 3800*2000*2300mm, Weight: 5500kg
2. Worksite air compressor is mainly used in agricultural irrigation, industrial water supply, urban water supply, geological exploration, geothermal development and other fields, which provides important technical support for the acquisition of groundwater resources or related geological work.
Details
The working principle of worksite air compressor is to drive the rotary system through the power system, make the drill bit rotate and apply pressure to cut and break the underground rock and soil layer. At the same time, the mud circulation system transports the mud to the bottom of the well, cools and lubricates the drill bit, and carries the rock chips to the surface. The hoisting system, on the other hand, raises or lowers the drilling tools at the right time according to the drilling conditions to control the drilling depth and change the drill bits, etc.
Drilling diameter
Generally between a few hundred millimetres, different diameters of drill bits can be selected for drilling according to actual needs.
Drilling depth
Can reach tens of metres or even hundreds of metres, different models of worksite air compressor drilling depth varies to meet different geological conditions and water requirements.
Drilling speed
Depending on a variety of factors, such as geological conditions, type of drill bit, power level, etc., the drilling speed generally ranges from a few metres per hour to tens of metres per hour.
Specification Parameters
|
Model |
YLCG-35/35 |
|
Diesel engine |
FAW XICHAI |
|
Rated power |
412kw |
|
Exhaust volume |
35m³/min |
|
Exhaust pressure |
35bar |
|
Compression level |
Bose (two-stage compression) |
|
Storage tank capacity |
280L |
|
Screw machine oil quantity |
120L |
|
Engine model |
6DM3-53KG31-YM20 |
|
Emission Standard |
National III |
|
Rated speed |
1800rpm |
|
Idle speed |
1450rpm |
|
Diesel engine lubricating oil |
35L |
|
Coolant volume |
80L |
|
Fuel tank capacity |
480L |
|
Average fuel consumption |
65-75L |
|
Size |
3800*2000*230mm |
|
Whole machine weight |
5500KG |
|
Unit walking mode |
Fixed or mobile |
Uses
Water well drilling
Provide power for the wind tools of water well drilling rigs, such as impactor and rotary head, to improve the drilling efficiency, and also blow the rock chips, mud and other impurities in the drilled hole out of the hole by compressed air.
Well washing operation
High-pressure compressed air is injected into the well, mixed with water to form a gas-water mixture, and its impact force and sand-carrying capacity are used to clean the well wall, dredge the aquifer, and improve the water output and quality of water wells.
Air-lift drainage
For wells with deep water level, the compressed air provided by the compressor is used to lift the water from the well to the surface by means of air-lift.
Features
A wide range of models and power sizes to meet the needs of various construction sites, optional dual conditions to meet a variety of site conditions, the full range of machines can be customised machine colours, etc. Contact us to discuss your requirements.
Contact
Welcome to buy open drill machinery manufacturing, high efficiency, easy to operate, made with care, must be your best choice. We provide you with factory price, satisfactory service and timely delivery, looking forward to your contact.
FAQ
Hot Tags: worksite air compressor, China worksite air compressor manufacturers, suppliers, factory, best quiet air compressor, air compressor cart, small gasoline air compressor, air compressor suppliers, good air compressor, small rotary screw air compressor
